Mustang Racing Parts – Drag Race & Road Race Builds
Mustang S550 Racing Builds
Mustang S550 Racing Builds 2015+
Watson Racing invites you to view the Mustang S550 Racing feature page. Because you will find a snapshot of the S550 Mustang collection. Therefore starting with the official 2015 Watson Racing Mustang S550 Build. Due to WR crews are late model thru 2017+ Mustang Racing Experts! Also, the Cobra Jets and Mustang Racing builds skillfully fabricated and prepped in the well-equipped race shop in Brownstown, Michigan. While road or drag racing, whether you are a weekend racer or full-time pro., the proof can be found on the finish-line – or on the time clock. So, to put the best fabrication, prep., and tune into your car, call the experts at Watson Racing! 855.WAT.RACE
Watson Racing specializes in late model Mustang racing parts and race car builds. Also an affiliate of Watson Engineering, founded in 1981 in Southeast Michigan. Watson is very proud to be an integral part of the Ford Performance Racing Cobra Jet … Continue reading →
S550 Mustang Dyno Tuning by Watson Racing. Getting ready for the track in 2017. If you want to optimize the calibration for ultimate power and performance, it’s what we do all day, every day. So, to get your S550 Mustang Dyno … Continue reading →
S550 Mustang IRS – 9″ Independent Rear Suspension by Watson Racing After years of S550 Mustang testing, Watson Racing brings you the much-anticipated Heavy Duty 9-inch Independent Rear Suspension system. Designed for the serious racer that doesn’t want to cut … Continue reading →
Quicker Picker Upper – 8.7 second Mustang S550 IRS Street/Strip Racer Watson Racing rips off a pair of 8.70 passes in its IRS-equipped Mustang S550 at Milan in 2015. By Steve Turner Photos courtesy of Watson Racing Watson Racing’s 2015 … Continue reading →
Brad Gusler of BG Racing runs the first 10-second pass in an EcoBoost S550 By Steve Turner Photos by Steve Turner and courtesy of Trip Ulvila and BG Racing It was only a matter of time before an EcoBoost Mustang broke … Continue reading →
We are on the eve of the biggest Ford drag race of the year, the NMRA World Finals at Beech Bend Raceway in Bowling Green, Kentucky. The air should be cool and the times should be quick. Curious about how … Continue reading →
WATSON RACING NEWS: 2015 MUSTANG GT 9.13-SECOND Breaking Bad – Watson Racing shatters the S550 e.t. record with a low-9-second run. Until recently all had been quiet in the world of 2015 Mustang GT e.t. records. Terry “Beefcake” Reeves took the … Continue reading →
Brad Gusler in his 2015 WR/SCT Ecoboost Mustang will be looking to take the crown as fastest EcoBoost in the world! NMRA All World Finals October 1 – 4, 2015 The last race for the 2015 NMRA season will take … Continue reading →
**PRODUCT ALERT NOW SHIPPING!!! ** 2015 Mustang S550 Lightweight Tubular K-Member Kit: Save a minimum of 30 lbs. off the front of your S550 drag or street/strip car! Designed to work with Strange race struts, custom built with S197 lower … Continue reading →
Watson Racing offers a Variety in Top-of-the-Line Mustang Roll Cage! Drag & Road Race Roll Cage, 4-point Bolt-in Roll Bars & 6-point Bolt-in Roll Bar! 4-Point Bolt-in Roll Bar (2005-14) 4-point Mustang Bolt in Roll Bar Part# WR_BOLTINCAGE 4-pt Mustang Bolt-in Roll Cage (2015) 4-point Mustang Bolt-in Roll Bar Part# … Continue reading →
Watson Racing S550 has been to the show and the strip. It began as a SEMA project, then was used as a research and development test bed for more S550-related street/strip hardware. The Watson Racing S550 then was the first to hit 9’s, then 8’s and in 2015/16 was the World’s Fastest 2015 Mustang with IRS. Here is one of the original dyno pulls with the S550 at the Watson Racing Shop.
Choosing to forego the glitz that is sometimes the hallmark of SEMA cars, the focus was instead on function. To shed some 30 pounds of nose weight. Watson’s experienced fabricators engineered a complete TIG-welded tubular K-member and front suspension setup. This chromoly cradle they bolted a 5.0L Coyote (built in house) toughened with Oliver rods and Mahle pistons. Tweaked with Ford Performance cams. Tuned via FAST XFI. Topped with a 2.9L front-inlet, twin-screw Whipple supercharger. Through a Tremec Magnum XL six-speed, the combo sent a “conservative” 927 hp and 702 lb-ft to the rear wheels.
Watson engineered and fabricated this complete tubular K-member/suspension package as part of the car’s weight-loss program. Watson Racing 2015 Mustang parts are now sold through the Watson Racing shop website.
One badass 2015 Mustang S550 equally at home on the dragstrip & Show! Despite what you see, Watson Racing’s original idea had been to build a road-race-themed S550 for the SEMA show in Las Vegas. It was the crew at … Continue reading →
2015 EcoBoost Mustang Racing Deep Into the 11s at 119 mph in the Quarter-Mile Setting the Bar High: Brad Gusler has driven the fastest trucks in NMRA, so at first, jumping behind the wheel of a four-cylinder Mustang might not … Continue reading →
SCT is looking for low et’s and high Mile an Hour out of Brad’s car The owner of this bad boy is Brad Gusler. Now if that name sounds familiar, it should, he and his wife own BG racing, … Continue reading →
By Steve Turner Photos by Steve Turner (SVT PERFORMANCE) and courtesy of Miller Motorsports Park If you aren’t familiar with the Ford Racing School at Miller Motorsports Park in Tooele, Utah, you are really missing out. It is driving school run … Continue reading →
Ford Motor Company set to rock the halls with a barrage of 2015 Mustangs at the 2014 SEMA show. Ford worked with top builders including Watson Racing and many others, to showcase over a dozen custom Mustangs in its 20,000-square-foot … Continue reading →
This year’s SEMA show was packed with plenty of super hot Mustangs. The Mustang was named by SEMA as the hottest car of the show. There were so many cool cars that it is impossible for us to bring them … Continue reading →
Street/Strip Stallion Watson Racing preps a straight-line superstar for The SEMA Show By Steve Turner Photos courtesy of Watson Racing Without a doubt, the leading contender for The SEMA Show’s Hottest Car award next week is the 2015 Mustang. As you read this, … Continue reading →
Ford has worked with top builders including Galpin Auto Sports, Petty’s Garage, MRT, Watson Racing and many others, to showcase over a dozen custom 2015 Ford Mustangs Evan J. Smith Mustang360 Network Content Director October 28, 2014 Photos By: Ford Motor Company, Watson … Continue reading →
Ford Racing is first out of the box with bolt on goodies for the new 2015 Mustang S550 platform. Stay tuned here for Watson Racing new product offerings! Coming really soon! Want Ford Racing Performance Parts for your 2015 Mustang S550? … Continue reading →
PRI 2014: 2015 Mustang Racing Hood For Drag, Street, or Road Racing S550s By Don Creason – posted on Dec 16, 2014 in PRI Coverage It’s no secret that the 2015 Mustang is the hottest thing in the performance aftermarket right … Continue reading →
Lightweight 2015 Mustang Racing Windows – Clearly Lighter! Watson Racing lightens its 2015 Mustang S550 racer with shatter-resistant windows from Optic Armor ~ By Steve Turner Modern Mustangs are brimming with features and technology. This gear makes them great everyday cars that … Continue reading →
2015 FORD MUSTANG DEBUT – YOU WON’T MISS YOUR INHIBITIONS ONE BIT. On December 5th Ford unveiled the all-new 2015 Ford Mustang Debut Introducing the all–new Mustang. Its look says entirely new, but its soul is entirely Mustang. Taking inspiration from a … Continue reading →
